- 首页
- 产品中心
-
-
- 集成电路 Integrated Circuits (ICs)
- 模拟引擎 Analog Engine
- 模拟开关 Analog Switch
- 音频放大器 Audio Amplifiers
- 音频转换器 Audio Converters
- 音频开关 Audio Switch
- D类放大器 Class D Amplifiers
- 比较器 Comparators
- 数字信号处理器 Digital Signal Processors (DSP)
- 麦克风增益控制器 Microphone Gain Controllers
- LED驱动器 LED Drivers
- 线路驱动器 Line Driver
- 平衡线路接收器 Balanced Line Receivers
- MEMS麦克风 MEMS Microphones
- 麦克风前置放大器 Microphone Pre-amplifiers
- 运算放大器 Operational Amplifiers
- 石英振荡器驱动器 Quartz Oscillator Drivers
- 压电驱动器 Piezo Drivers
- 通讯 Telephony
- 压控放大器 Voltage Controlled Amplifiers (VCA)
- 音量控制 Volume Control
- 晶振IC Crystal Oscillator IC's
- 传感器 Sensor Signal Interface
- 集成电路 Integrated Circuits (ICs)
-
-
- 代理品牌
- 应用领域
-
- 关于我们
- 新闻资讯
- 联系我们
- 企业店铺
THAT4305Q16-U 模拟引擎动态处理器
- 预调整的 VCA 和 RMS 电平检测器
- 宽电源电压范围:±4.5V 至 ±16V
- 低电源电流:典型值为 3.5 mA。(±15V)
- 宽动态范围:117 dB (VCA),60 dB(RMS 电平检测器)
技术规格
电源电压(最低) Supply Voltage (minimum) | ±4.5V |
电源电压(最大) Supply Voltage (maximum) | ±16V |
电源类型 Supply Type | Dual |
电源电流 Supply Current | 3.5mA |
总谐波失真 Total Harmonic Distortion | 0.07% |
总增益范围 Total Gain Range | ±60dB |
详细描述
THAT4305 是一款单芯片模拟引擎,针对低成本应用进行了优化。
它集成了高性能 Blackmer® 压控放大器 (VCA) 和对数响应 RMS 电平传感器。VCA 和 RMS 检测器在晶圆阶段预先微调,无需进一步调整即可提供低失真。
4305 仅采用小型 (QSOP) 表面贴装封装,面向线路操作的音频应用,例如压缩器/限幅器、门限和其他动态处理器。该部件通常在高达+ 16 Vdc的分离电源电压下工作,在+ 15 V 时仅消耗 3.5 mA 。该 IC 也可在低至+ 4.5 V 的电源电压下工作 ,因此也可用于某些电池供电产品。
4305 专为用于低成本动态处理器而开发。VCA 控制端口和探测器输入和输出都可用于用户配置的连接。因此,该部件极其灵活,可针对各种应用进行配置,包括单频段和多频段压扩器、数字过载保护器、压控推子、电平指示器等。
真正将 4305 与其他制造商的产品区分开来的是其 Blackmer VCA 的透明声音,再加上其准确的真有效值电平检测器。这使得该 IC 可用于各种模拟音频产品
演示板 THAT4305DEMO 可用于该产品。
The THAT4305 is a single-chip Analog Engine optimized for low-cost applications.
It incorporates a high-performance Blackmer® voltage-controlled amplifier (VCA) and log-responding RMS-level sensor. The VCA and RMS detector are pre-trimmed at wafer stage to deliver low distortion without further adjustment.
Available only in a small (QSOP) surface- mount package, the 4305 is aimed at line-operated audio applications such as compressor/limiters, gates, and other dynamic processors. The part normally operates from a split supply voltage up to +16 Vdc, drawing only 3.5 mA at +15 V. This IC also works at supply voltages as low as +4.5 V, making it useful in some battery-operated products as well.
The 4305 was developed specifically for use in low-cost dynamics processors. Both VCA control ports and the detector input and output are available for user configured connection. As a result, the part is extremely flexible and can be configured for a wide range of applications including single- and multi-band companders, digital overload protectors, voltage-controlled faders, level indicators, etc.
What really sets the 4305 apart from other manufacturers' offerings is the transparent sound of its Blackmer VCA, coupled with its accurate true-RMS level detector. This makes the IC useful in a wide range of analog audio products
Demonstration Board THAT4305DEMO is available for this product.
规格书和资料
THAT 4301 to 4305 SchematicData SheetTHAT 4301 to 4305 Transition Guide