- 首页
- 产品中心
-
-
- 集成电路 Integrated Circuits (ICs)
- 模拟引擎 Analog Engine
- 模拟开关 Analog Switch
- 音频放大器 Audio Amplifiers
- 音频转换器 Audio Converters
- 音频开关 Audio Switch
- D类放大器 Class D Amplifiers
- 比较器 Comparators
- 数字信号处理器 Digital Signal Processors (DSP)
- 麦克风增益控制器 Microphone Gain Controllers
- LED驱动器 LED Drivers
- 线路驱动器 Line Driver
- 平衡线路接收器 Balanced Line Receivers
- MEMS麦克风 MEMS Microphones
- 麦克风前置放大器 Microphone Pre-amplifiers
- 运算放大器 Operational Amplifiers
- 石英振荡器驱动器 Quartz Oscillator Drivers
- 压电驱动器 Piezo Drivers
- 通讯 Telephony
- 压控放大器 Voltage Controlled Amplifiers (VCA)
- 音量控制 Volume Control
- 晶振IC Crystal Oscillator IC's
- 传感器 Sensor Signal Interface
- 集成电路 Integrated Circuits (ICs)
-
-
- 代理品牌
- 应用领域
-
- 关于我们
- 新闻资讯
- 联系我们
- 企业店铺
NJM7912FA 三端负电压稳压器
- 完全隔离 - 无需绝缘垫圈。
- 易于隔离相邻设备。
- 更好的传导特性。
- 更高的可靠性和更好的耐湿性。
- 完全隔离 - 无需绝缘垫圈。
- 易于隔离相邻设备。
- 更好的传导特性。
- 更高的可靠性和更好的耐湿性。
技术规格
电压 Voltage | -12V |
家庭电压范围 Family Voltage Range | -5V to -24V |
输出电流 Output Current | 1.5A |
电源电压(最大) Supply Voltage (maximum) | 40V |
参考电压容差 Voltage Reference Tolerance | 4% |
压降电压 Drop-out Voltage | 2V |
纹波抑制比 Ripple Rejection Ratio | 60dB |
静态电流 Quiescent Current | 2.7mA |
详细描述
NJM7900 系列是单片 3 端子负电压调节器。采用New JRC Planar外延工艺构建;这些稳压器采用内部限流、热关断和安全区补偿,使它们基本上坚不可摧。
通过充分散热,它可以提供超过 1A 的输出电流。它旨在作为广泛应用中的固定电压调节器,包括本地或卡上调节,以消除与单点调节相关的噪声和分布问题。
该器件可与外部组件一起使用以提供可调输出电压和电流。NJM7900 系列是单片 3 端负电压调节器。采用New JRC Planar外延工艺构建;这些稳压器采用内部限流、热关断和安全区补偿,使它们基本上坚不可摧。
通过充分散热,它可以提供超过 1A 的输出电流。它旨在作为广泛应用中的固定电压调节器,包括本地或卡上调节,以消除与单点调节相关的噪声和分布问题。
该器件可与外部组件一起使用,以提供可调的输出电压和电流。
The NJM7900 series are monolithic 3-terminal, negative voltage regulators. Constructed using the New JRC Planar epitaxial process; these regulators employ internal current-limiting, thermal-shutdown and safe-area compensation making them essentially indestructible.
With adequate heat sinking it can deliver over 1A output current. It is intended as a fixed voltage regulator in a wide range of applications, including local or on card regulation, to eliminate the noise and distribution problems associated with single-point regulation.
This device can be used with external components to provide adjustable output voltages and currents.The NJM7900 series are monolithic 3-terminal, negative voltage regulators. Constructed using the New JRC Planar epitaxial process; these regulators employ internal current-limiting, thermal-shutdown and safe-area compensation making them essentially indestructible.
With adequate heat sinking it can deliver over 1A output current. It is intended as a fixed voltage regulator in a wide range of applications, including local or on card regulation, to eliminate the noise and distribution problems associated with single-point regulation.
This device can be used with external components to provide adjustable output voltages and currents.